Durastill Water Distiller Parts | Water Distillation Equipment

Plastic Leg For 30J, 30H, 46A, and 46C

$10.08

Condenser Coil Replacement Kit 46C and 46A

$203.50

Model 500, TC500 & 700 Fan Motor

Fan Motor, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. The Fan Motor does not come with the Fan Blade, and can be purchased separately using this LINK, or in the suggested produ... Read More

$93.30

Float Spring Clip (automatic only)

$2.85

Model 500, TC500 & 700 Drain Valve

Drain Valve, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Three full turns to open/ close the drain valve fully. Easy screw on installation, may require an open end wrench to dis... Read More

$49.00

Mega-Classic Stand

$249.95

Heating Element Kit for 240 Volt 46A or 46C

Heating Element Kit with Seals and Brackets. 800 Incoloy heating element - Incoloy contributes resistance to corrosion and scaling at high temperatures. Read More

$161.43

Fan Blade

$14.80

Toggle Switch Replacement Kit

$30.45

Universal Fit Pre-Filter

Service life: 1 year maximum however, recommended service interval 3-6 months. Usage will vary depending on demand and source water Features: Sediment Reduction: 5 microns. Protects Water Distillers and helps with maintenance. ... Read More

$24.00

Condenser Coil Replacement Kit 30J/30H

$107.75

Float Switch Actuator

$7.71

Gravi-stil ceramic filter

$45.00

Pulsation Eliminator Tank .6 Gal.

$198.61

Model 500, TC500 & 700 Fan Blade

Fan Blade, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. The Fan Blade does not come with the Fan Motor, and can be purchased separately using this LINK, or in the suggested produ... Read More

$59.00

Precision Pump Kit WITHOUT Faucet

Pump Only Kit 120V W/ Circular Twist Lock Power Connection & SS Cover, 1/2" MNPT In/Out, 60PSI, 1.4 GPM. LESS Water Connection Fittings, Tubing, & Faucet. Replaces. NOT FUSED At Pump. Must Be Fused Under Distiller Head (rear). If you ... Read More

$338.00

See Options

Fan Motor for Model 200

$49.95

See Options

150 Gallon Storage Tank

Features & Convenience: 18 Gauge, 304 Stainless Steel Specifications: Height: 52 inches, (including stand) Width: 31 inches Depth: 31 inches Shipping Weight: 150 lbs Overall Height with Distiller moun... Read More

$3,777.00

Filler Tube Assembly for 4 and 4.5 Gallon Reserve Tanks

$5.50

Universal Fit Post-Filter

Service life: 1 year maximum however, recommended service interval 3-6 months. Usage will vary depending on demand and source water Features: Sediment Reduction: 5 microns. Coconut Shell Granular Activated Carbon Filter 12 x 40 Mesh... Read More

$24.00

Automatic Drain Valve for 42C for use outside North America

Unlike the Durastill Automatic Drain Valve which is made especially for the 42C when using in North America, (which plugs into a regular 120 Volt outlet), this Auto Drain Valve is battery operated which allows it to be used in countries with 220/2... Read More

$519.00

Storage Tank Faucet for 5 gallon tanks

$149.66

150 Gallon Automatic Storage Tank

Features & Convenience: 18 Gauge, 304 Stainless Steel 24 Volt float switch in storage tank for high level control. Specifications: Height: 52 inches, (including stand) Width: 31 inches Depth: 31 inches ... Read More

$3,937.00

Water Lovers Replacement Filter Tray

Waterlovers replacement filter tray. Sold as each, filters are sold separately. WARNING if the tray has melted, this is indicative of a failed NTC. If the tray is replaced without the NTC replaced at the same time, the new tray will melt as ... Read More

$14.90

See Options

Midi-Classic Stand

$229.95

Ice Maker Hook-Up Kit with Accumulator

$134.95

Gasket heater element, fits all PWS, Polar Bear, & LifeMist models

Heating Element Gasket, fits all PWS, Polar Bear, & LifeMist models

Precision Water Systems Heating Element Gasket. Fits River, Lake, Gulf, and Sea models. This product is just the heating element gasket alone. If you need the a heating element and or heating element clip, they can be purchased using the link... Read More

$8.40

Element clip, SS, secures heater element. Fits all PWS, LifeMist, Polar Bear models

Precision Water Systems Heating Element Clip. Fits River, Lake, Gulf, and Sea models. This product is just the heating element Clip alone. If you need the a heating element and or heating element gasket, they can be purchased using the links ... Read More

$9.50

Model 500, TC500 & 700 Inlet Tube

Inlet Tube, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Easy slip on installation, no adhesive required. For use from the boiler tank to the solenoid valve. Read More

$33.00

Heating element 125V 1100W. Fits models PWS 8-M, PWS 8-5, PWS 8-8

Heating element 120V 1100W for Precision River and Lake. Wetted surface material is Alloy 800. Offering general corrosion resistance to many aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking. This product ... Read More

$105.00

Mega Classic replacement demand pump

$234.95

Heating element 125V 1500W. Fits 12 gpd PWS, LifeMist, Polar Bear models

Heating element 120V 1500W for Precision Gulf and Sea. Wetted surface material is Alloy 800. Offering general corrosion resistance to many aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking. This produc... Read More

$113.00

Demand Pump Kit (without refrigerator adapter kit)

$339.35

220-240 Volt Option

Add this item to your order along with any Precision branded water distiller for 220, 230 or 240 voltage configuration. Lead time will be approximately 30 days from time of order. Please specify the country the distiller is going to be used i... Read More

$145.00

Stainless Steel Sink Mounted Faucet

$29.95

Model 500, TC500 & 700 Rubber Base

Rubber Base Foot, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. This product is for a SINGLE rubber foot. If you need more than one, please adjust the quantity to your cart. Easy ... Read More

$28.00

Model 500, TC500 & 700 T-Joint

T-Joint, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. T-Joint to be installed on the water line for easy ON/ OFF operation of the source water coming into the distiller. Read More

$28.50

Model 500, TC500 & 700 Pre-Filter Mount

Pre Filter Mount, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Easy one screw installation. Does not come with hardware, as the one screw needed for installation is located in th... Read More

$11.25

Model 500, TC500 & 700 Boiling Chamber L fitting

Boiling Chamber L fitting, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Easy screw on installation to the boiler tank. Read More

$42.00

Model 500, TC500 & 700 Distilled Water Outlet Tube

Outlet Tube, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Easy slip on installation, no adhesive required. For use from the bottom of the condensing coil to the Stainless Steel C... Read More

$29.00

Model 500, TC500 & 700 Wing Nut

Wing Nut, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. This product is for a SINGLE Wing Nut. If you need more than one, please adjust the quantity to your cart. Easy screw on ap... Read More

$6.30

Model 500, TC500 & 700 Silicone Sensor T

Silicone Sensor T, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. This product is for a SINGLE Silicone Sensor T. If you need more than one, please adjust the quantity to your cart... Read More

$72.00

Model 500, TC500 & 700 Faucet

Faucet with Sight Glass, ONLY for use with Models 500, TC500 or Model 700. It will not work for other similar looking distillers. Easy screw on installation. does not come with black washer that sits in between the reserve tank and faucet. Read More

$280.50

Refurbished/ Scratch & Dent. Water Lovers MKIII Main Chamber

WaterLovers MKIII replacement main body. This product is for the main body alone, and does not include the power cord, boiling chamber, boiling chamber lid, Glass Carafe, and filter/ cleaning accessories. The previously listed items can be purchas... Read More

$149.99

Steam Pure single filter w/fitting

$21.95

Supplies, Accessories and Parts for Water Distillers