The H2oLabs Under sink Filter System comes with everything needed to filter your drinking and cooking water. This also works great for a longer term prefilter for your home water distiller. Simply connect the system to your distiller inlet instead of the faucet for a long lasting prefilter with less maintenance cost.
The AMERICAN MADE filter provides many benefits such as:
- Filter is NSF/ANSI certified for reduction in chlorine, taste, odor, lead and cysts.
- Your choice of brushed steel or black finish. Just select the option below.
- 3,000 gallon or year filter capacity, whichever comes first.
- Filter is WQA listed for sustainability.
- Activated Carbon media made form coconut shell.
- 360 degree swivel faucet for easy use.
- 1 micron filtration capacity.
- Modern and sleek design.
- Simple quick disconnect and hand tool installation. Everything is included for the first year of operation.*
The optional faucets are made from 304 Stainless steel and come in either brushed steel or matte black. The 360 degree swivel spout and quarter turn lever make for easy use. This kit can be used for other purification methods and act as a great addition to your distiller if you have a demand pump system. The single stage filter that only needs to be replace annually* can replace the distillers post-filter that has to be replace every 3 months. This lowers the operating cost and maintenance requirements of your distiller!
Technical Specifications:
- Filter is NSF/ANSI Standard 42 certified for reduction in chlorine, tase, and odor.
- Filter is NSF/ANSI Standard 53 certified for reduction in lead and cysts.
- WQA listed.
- Flow rate: 1.4GPM.
- Initial pressure rating at 1GPM: Up to 5.0 psid
- Filtration rate: 3,000 gallons or 1 year, whichever comes first.
- Operating temp: 40 to 100 ºF.
- Carbon weight per filter: 0.80 lbs
- Carbon type: Activated Coconut Shell Carbon.
- Filter head: non-valved.
- Faucet Hight: 11.5".
- Installation kit and supplies included.
*One year operation is dependent on source water and usage. Water demand requirements are based off of annual household drinking and cooking water requirements of 3,000 gallons per year. If your requirements are higher, then additional filter changes will be needed, but only the filter. Replacement filters can be found at this LINK.
Contact Us
